It groups the colloidal particles in suspension facilitating their subsequent removal in the filtration. This causes the pool water to have a more transparent and crystalline appearance. POOL FLOCCULANT SUITABLE FOR ALL TYPES OF POOLS. Do not use this product in Diatomaceous filter installation.2. Main components -Polyaluminium Chloride CAS: 1327-41-93. Characteristics – Appearance: Transparent or slightly milky liquid – Relative density: 1.04 g/cm3 – Water solubility: Fully soluble – pH: 3.54. Instructions for use -Measure and adjust the pH, if necessary, of the pool water in this range: 7.2-8.0. -Similarly, measure and adjust the free chlorine in this range 0.5-2 ppm (If bromine 2.0-5.0) -RECOVERY TREATMENT: After stopping the filtration equipment and without swimmers, add 2L of the product for every 100m3 of water. Dissolve the dose previously in a bucket of water, and distribute it over the entire surface of the pool. Let it act for 6-8h and remove the floc with the pool cleaner. -MAINTENANCE TREATMENT: Add weekly, 1L for every 100m3 of water. -Increase the dose according to the turbidity of the water. Use in ventilated areas. Wash hands after use.5. Precautions and warnings -Keep in the original container. Avoid water entering the container. Do not mix with other products. Keep away from incompatible substances. -Keep out of reach of children and keep locked up. More safety information in the product safety data sheet. -This dose is indicative, as it depends on the turbidity of the water and the use of the pool. -Do not use with diatomaceous or cartridge filters.
