Description NEW YORK 2500 FEATURES & BENEFITS: 3in1 combination device: AC/DC TIG, MMA/STICK, plasma cutting AC/DC TIG welding: Processing of all weldable metals, including aluminum The adjustable AC output frequency allows the operator to focus the arc, minimizing the heat affected zone Advanced AC balance control helps maintain a sharp tungsten needle to precisely control the arc in the weld joint. Pulse function: during pulse welding, the welding current changes between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece HF ignition (TIG) 2 bar/4 bar MMA/STICK/E-HAND: coated electrodes are used – in this process the electrodes are arc carriers and welding filler metal in one. Hotstart: every time the welding machine is restarted, overcurrent is provided and thereby supports the ignition of the arc. Arc-Force: Melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between the electrode and the melt pool. Anti-stick: automatically switches off the welding generator if the electrode sticks to the workpiece and needs to be removed by hand without damaging the electrode clamp. Plasma cutter: CUT function using a plasma jet generated by electricity. This melts the material and removes it with compressed air – a precise cut is created. This process can be used to cut all conductive metals (e.g. steel, stainless steel, aluminum, copper, etc.) Cutting thickness: maximum 12mm (hand-held), quality cut 8mm (hand-held) Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents Job memory: the New York 2500 has 9 memory locations NEW YORK 2500 FEATURES: NEW YORK 2500 TECHNICAL DETAILS: Welding current setting range (TIG mode) 10 -200 A Welding current setting range (MMA/STICK mode) 10 -170 A Welding current setting range (CUT mode) 20 – 50 A Duty cycle (ED) TIG 40°C 200A at 18V 40% Duty cycle (ED) MMA/STICK 40°C 170A at 26.8V 25% Duty cycle (ED) plasma cutter 40°C 50A at 100V 40% Mains voltage 1 x 230 volts Mains frequency 50 – 60 Hz Protection class IP23 Dimensions in mm (L x W x H) 380x160x360 Weight in kg 11.5 Norms EN60974-1 / EC60974-1 Maximum cutting capacity (hand-held) 13mm Quality cutting capacity (hand-held) 8mm NEW YORK 2500 SYSTEM CONTROLS: 1. Display display 5. On/Off 9. Select button 2. PULSE function 6. Overheat indicator 10. Hotstart/Arc Force/Anti Stick 3. 2 bar/4 bar 7. JOB and SAVE 11. Parameter settings 4. Mode (MMA/WIG/CUT) 8. AC/DC mode 1. Gas flow 5. Secondary current 9. Final stream 2. Starting current 6. Pulse Width (%) 10. Gas follow-up 3. Current increase 7. Pulse frequency (Hz) 11. AC frequency 4. Welding current (primary) 8. Current reduction 12. AC Balance Series: Performance Series Shipping weight: 16.30kg Item weight: 15.20kg
