$14.67
$18.04
Product Information Works with a Full Suite of Probes (Probes must be ordered separately) The NewSonic SonoDur 3 hardness tester works with both manual probes – standard, long, thin and specialized (1N to 100N, 0.1 to 10 kgf) or motorized probes (1N to 8.6N, 0.1 to 0.9 kgf) to test the hardness of metals. The long, thin and special versions allow testing of difficult to reach areas. The SonoDur3 UCI (Ultrasonic Contact Impedance) probes work with a variety of different manufactured parts including serial parts after heat treatment, welds, coatings and in applications after surface processing. Replaces MIC10/MIC20 & Conforms to ASTM/DIN The SonoDur 3 (and SonoDur 2) replaces GE’s MIC 10 and MIC 20 series UCI hardness testers. Using rapid hardness measurements via a Vickers diamond, the SonoDur 3 will help you assess whether or not your parts meet your hardness quality assurance standards. The unit meets ASTM A 1038 and DIN 50159-1 and 2 standards and can convert readings to ASTM E 140-13 and EN ISO 18265 material tables. The Vickers diamond testing pressure displays digitally and refreshes after each measurement. Intuitive Menus/Touchscreen The SonoDur3 features an intuitive touchscreen interface and enables reassessments for other hardness scales and adheres to applicable standards for the particular probe in use. The unit also features recognition and test controls with calibration, material reassessment table, time of probe penetration, operator name and tolerance thresholds. Current Technology The SonoDur3 is kept up-to-date with free updates made available from NewSonic. Wide Range of Applications Wide-range testing ability: The SonoDur3 makes it possible to measure soft aluminum (20HB) to harder metals (approx. 1600HV) using a probe. Features INSTRUMENT FEATURES Carrying strap, edge protection, IP65, MIL-810G (vibration, shock, drop) Brilliant color display in 5’’, smooth glass shield for easy cleaning Direct function access just by touch, intuitive menu control, ideal for MIC10/MIC20 users and others No set-up needed at beginning of shift – ready for immediate use ANDROID OPERATING SYSTEM AND DATA TRANSFER USB: transfer of measurement data in txt-format using the file explorer WLAN: automatic transfer of single values, completed data stets Bluetooth: manual transfer of a set of measurement data “Unlimited” storage capacity for measurement data and settings INTELLIGENT MANAGEMENT OF MEASUREMENT DATA AND SETTINGS Simple access to data and qualified back-traceable assessment of results File names can be predefined, automatic closing of data sets “AllMeas”- summarized list of results in stored data sets RELIABLE MEASUREMENT TECHNIQUE WITH LONG-TERM STABILITY Efficient working tool, optimized for the daily needs of the inspector UNIQUE Can be calibrated in full according to DAKKS after DIN 50159-2 (calibration curve 150 – through 900 HV, diamond, nominal test force) Measuring Specifications Measuring Principle UCI Method, corresponds to DIN 50159, ASTM A1038 Test Indenter Vickers diamond 136° Test loads Newton scale (1 kgf = 9.81 N) Motor probes: 1N (0.1 kgf), 3N (0.3kgf) and 8.6 N (0.9 kgf) Handheld Probes: 10N (1 kgf), 49N (5kgf), 98N (10kgf) (Other test loads on request) Hardness scales and range (according to relevant standards), in this case table A1 respectively T1, T2 (low alloy steel). Different measuring ranges are valid for other materials. When exceeding the limits the conversion range will be extended. The calculated values are highlighted in red besides the original data in HV. Note: Conversions are acc. to latest ASTM E140-12bԐ1 (2013) und EN ISO 18265:2014. Conversions into tensile strength: 98N (10kgf) test load only Vickers HV 10 – 1999 (9999) Brinell HB 76 – 618 Rockwell HRB 41 – 105 Rockwell HRC 20.3 – 68 Rockwell HRE 70 – 108.5 Rockwell HRF 82.6 – 115.1 Rockwell HRA 60.7 – 85.6 Rockwell (EN ISO 18265 only) HRD 40.3 – 76.9 Rockwell HR45N 19.9 – 75.4 Knoop (ASTM E140 only) HK 87 – 920 Shore (ASTM E140 only) HS 34.2 – 97.3 Tensile strength MPa 255 – 2180 Measurement uncertainity * < 4 % (HV5, HV 10). For other test loads and ranges see table below. Relative repeatability* < 5 % (HV5, HV 10). For other test loads and ranges see table below. *exceeds DIN 50159, dependent on test load and range (see table below). Specifications are valid for 5 measurements using Vickers reference blocks and according to test conditions given in standard DIN 50159. Hardness scale Measurement uncertainty [%] Relative repeatability [%] <250 HV 250 HV – 500 HV 500 HV – 800 HV > 800HV <250 HV > 250 HV HV 0.1 5 6 7 8 8 6 HV 0.3 5 6 7 8 8 6 HV 0.8 4 4 5 6 8 6 HV 1 4 4 5 6 8 6 Mechanical and Environmental (Instrument and probe) Operating Time >10 hours in measurement operation (depending on system performance, temperature and instrument settings), up to 8 hours continuous operation, quick exchangeable battery pack (3.7V 3900mAh LiPolymer) Operating Temperature Probe: 0°C to ~ 45°C Instrument: -10° ~ 50°C // Charging 10°C ~ 40°C Storage Temperature -20°C ~ 70°C Humidity Max. 90%, non-condensing Dimensions Instrument ca. 164x86x23 mm Motor probe Ø38mm, L=190 mm Handheld probe Ø25 mm, L=176 mm (free length oscillation rod ca. 12.5 mm) Handheld probe Ø25 mm, L=207 mm (free length oscillation rod ca. 43 mm) Weight Instrument ca. 320 gr (incl. battery pack) Handheld probe ca. 280 gr Motor probe ca. 370 gr Instrument Processor and memory ARM® Cortex™-A53 Octa Core 1.3 GHz / System 2GB RAM / storage memory 16 Gb eMMC / Micro SD card 4 GB (up to 32 GB) Operating system Android 5.1 (Android 7.0) Keypad 4 function keys, system touch keyboard Power Main battery: 3,7V / 3900mAh, LiPo hard pack, quick exchange Charging time: <3h to 80% capacity (Instrument off) Shelf Hours: Up to 6 month AC Power supply/charger: 90V to 264VAC 50/60Hz to 5VDC Display 5″ sunlight readable multi touch display (1280×720 pixel), LEDbacklight (500 Cd/m2), adjustable Interfaces Round power jack 5VDC operating / charging Docking connector (charging) USB 2.0 Micro USB (PC) / probe connector Lemo 4 pos. Micro SD-card 4 GB (up to 32 GB) WLAN 802.11 a/b/g/n Bluetooth 4.0 (supports BLE mode) GPS / AGPS / GLONASS 2x SIM card NFC GSM/GPRS/EDGE (b2/b3/b5/b8) WCDMA/HSDAP/HSPUA, FDD-LTE / TDD-LTE) Speaker, microphone Sensors / Camera / LED Light sensor, G-sensor, proximity sensor, rear camera 8 megapixel, multicolor status LED IP-Proof IP65 according IEC 60529 Edition 2.1:2001-02 Drop test MIL-STD-810G Methode 516.6, 4 ft. Shock Test MIL-STD-810G Methode 516.6 Prozedur I Vibration Test MIL-STD-810G Methode 514.6 Prozedur I Instrument Language D, EN, IT, FR, SP, PL, CZ, CN – more on request Package Includes PROBES MUST BE PURCHASED SEPARATELY. Package Includes: SonoDur3, Hardness Tester with Data Logger and Data Export, Data Transfer to PC (USB, WLAN or Bluetooth resp.) SONO3-NG, Power Source incl. Cable, coutry specific line adapter SONO2-NG/USB USB-Cable for Power Supply SONO-NG loading and data transfer SonoDur2/SonoDur3 SONO2-HM, ca. 1,5 m Probe Connection Cable SONO3-TK-1, Transportation Case SONO-CD, Product-USB-Stick incl. Operating Manual SONO3-Protect, Protection Foil for Touchscreen Resources SonoDur3 Brochure
Portable Instruments
