Description MIG 145 Operation Manual MIG 165A FEATURES & BENEFITS: Welding with automatic wire feed . With and without gas! The wire feed speed can be controlled via the volts: a higher volt leads to a slower wire feed, lower volts speeds up the wire feed. A big advantage if an individual setting is desired. Inductance: The device has a continuously adjustable throttle. This smoothes the welding current and changes the rate of current rise to improve weld quality and precision. MMA/STICK/E-HAND: coated electrodes are used – in this process the electrodes are arc carriers and welding filler metal in one. Hotstart: every time the welding machine is restarted, overcurrent is provided and thereby supports the ignition of the arc. Arc Force: Melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between the electrode and the melt pool. Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and needs to be removed by hand without damaging the electrode clamp. DC-TIG welding (optional: only possible with additional hose package and cables): Welding of almost all metals Lift Arc: Ignition occurs upon contact with the workpiece, then the torch can be raised and the welding process starts with the selected parameters. Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents Overheating protection MIG 165A FEATURES: MIG 165A TECHNICAL DETAILS: Welding current setting range (MIG/MAG mode) 30 – 165 A Welding current setting range (MMA/STICK mode) 30 – 160 A Welding current setting range (TIG mode) 10 – 160 A Duty cycle (ED) MIG/MAG 40°C 165A at 22V 60% Duty cycle (ED) MMA/STICK 40°C 160A at 26.4V 60% Duty cycle (ED) TIG 40°C 160A at 16.4V 60% Mains voltage 1 x 230 volts Mains frequency 50 – 60 Hz Protection class IP23 Dimensions in mm (L x W x H) 320x125x250 Weight in kg 6 Norms EN60974-1 / IEC60974-1 Wire diameter 0.6/0.8
