Description MIG 205 Operation Manual MIG 205A FEATURES & BENEFITS: MIG/MAG: Welding with automatic wire feed . MIG welding uses argon (less often helium) as the protective gas; this process is preferred for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as a protective gas and is mainly used for simple and low-alloy steel such as structural steel. Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), a preset current strength (A) and wire feed speed appear that are tailored to the selected wire thickness. The amperage can be changed within the specified limits. Amps are linked to volts, and the speed of the wire feed can be adjusted separately. In SPL mode (Separated Parameter Level) amps, volts and wire feed speed can be set independently. A big advantage if an individual setting is desired. br> Inductance: The device has a continuously adjustable throttle. This smoothes the welding current and changes the rate of current rise to improve weld quality and precision. 2 cycle/4 cycle (MIG/MAG and TIG) MMA/STICK/E-HAND: coated electrodes are used – in this process the electrodes are arc carriers and welding filler metal in one. Hotstart: every time the welding machine is restarted, overcurrent is provided and thereby supports the ignition of the arc. Arc Force: Melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between the electrode and the melt pool. Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and needs to be removed by hand without damaging the electrode clamp. DC-TIG welding ( optional : only possible with additional hose package and cables): Welding of almost all metals Lift Arc: Ignition occurs upon contact with the workpiece, then the torch can be raised and the welding process starts with the selected parameters. Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents Overheating protection MIG 205A FEATURES: MIG 205A TECHNICAL DETAILS: Welding current setting range (MIG/MAG mode) 30 – 205 A Welding current setting range (MMA/STICK mode) 30 – 170 A Welding current setting range (TIG mode) 10 – 200 A Duty cycle (ED) MIG/MAG 40°C 205 A at 24V 35% Duty cycle (ED) MMA/STICK 40°C 170A at 26.8V 35% Duty cycle (ED) TIG 40°C 200A at 17.2V 35% Mains voltage 1 x 230 volts Mains frequency 50 – 60 Hz Protection class IP23 Dimensions in mm (L x W x H) 391x153x282 Weight in kg 8th Norms EN60974-1 / IEC60974-1 Shipping weight: 11.80kg Item weight:
